MPXA6115AC6U vs MPXAZ6115A7U Comparison

Detailed side-by-side comparison of MPXA6115AC6U by NXP Semiconductors and MPXAZ6115A7U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MPXA6115AC6U MPXA6115AC6U - 15-115 kPa Absolute Pressure Sensor | NXP

MPXA6115AC6U - 15-115 kPa Absolute Pressure Sensor | NXP

MPXA6115AC6U ✓ Active
NXP Semiconductors
MPXAZ6115A7U MPXAZ6115A7U - 15-115 kPa Absolute Pressure Sensor | NXP

MPXAZ6115A7U - 15-115 kPa Absolute Pressure Sensor | NXP

MPXAZ6115A7U ✓ Active

Specification Comparison

Parameter MPXA6115AC6U MPXAZ6115A7U
Brand NXP Semiconductors NXP Semiconductors
Category Pressure Sensors Pressure Sensors
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $9.95 $10.10
Pressure Type Absolute Absolute
Operating Pressure Range 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa)
Maximum Over Pressure [DATA_NEEDED: maximum over pressure rating] —
Output Voltage Range 0.2 V to 4.7 V (at 5 V supply) 0.2 V to 4.7 V
Sensitivity 45.9 mV/kPa (typical) [DATA_NEEDED: typical sensitivity mV/kPa]
Supply Voltage 4.75 V to 5.25 V 5.0 V typical
Supply Current [DATA_NEEDED: supply current typical] —
Accuracy ±1.5% (0°C to +85°C) ±1.5% (0C to 85C, after NXP factory calibration)
Operating Temperature -40°C to +125°C -40C to +125C
Response Time 1.0 ms (typical) —
Port Style Single axial top port, 0.13" (3.17 mm) tube Top axial tube, 0.13" (3.17 mm) diameter
Package 8-SMD, Gull Wing (Case 1320-02, SOP-8) —
Mounting Type Surface Mount Through-Hole
Output Type Analog, ratiometric Analog Voltage
Signal Conditioning On-chip bipolar op-amp, temperature compensated On-chip bipolar op-amp + thin-film resistor network
Element Type Piezoresistive MEMS silicon —
RoHS Status Compliant Compliant
Operating Pressure Min — 15 kPa
Operating Pressure Max — 115 kPa
Package / Case — 8-DIP Module (0.560 inch, 14.22 mm)
Media Compatibility — Non-corrosive dry gases (media resistant)
Temperature Compensation — On-chip, factory calibrated

Datasheets & Resources

Browse All Products Create BOM Request Quote