MPXA6115AC6U vs MPXAZ6115A7U 比較
詳細な並列比較: MPXA6115AC6U メーカー: NXP Semiconductors および MPXAZ6115A7U メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MPXA6115AC6U | MPXAZ6115A7U |
|---|---|---|
| ブランド | NXP Semiconductors | NXP Semiconductors |
| カテゴリ | Pressure Sensors | Pressure Sensors |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $9.95 | $10.10 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Maximum Over Pressure | [DATA_NEEDED: maximum over pressure rating] | — |
| 出力電圧範囲 | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V |
| Sensitivity | 45.9 mV/kPa (typical) | [DATA_NEEDED: typical sensitivity mV/kPa] |
| 電源電圧 | 4.75 V to 5.25 V | 5.0 V typical |
| 電源電流 | [DATA_NEEDED: supply current typical] | — |
| Accuracy | ±1.5% (0°C to +85°C) | ±1.5% (0C to 85C, after NXP factory calibration) |
| 動作温度 | -40°C to +125°C | -40C to +125C |
| Response Time | 1.0 ms (typical) | — |
| Port Style | Single axial top port, 0.13" (3.17 mm) tube | Top axial tube, 0.13" (3.17 mm) diameter |
| パッケージ | 8-SMD, Gull Wing (Case 1320-02, SOP-8) | — |
| 実装タイプ | Surface Mount | Through-Hole |
| 出力タイプ | Analog, ratiometric | Analog Voltage |
| Signal Conditioning | On-chip bipolar op-amp, temperature compensated | On-chip bipolar op-amp + thin-film resistor network |
| Element Type | Piezoresistive MEMS silicon | — |
| RoHS ステータス | Compliant | Compliant |
| Operating Pressure Min | — | 15 kPa |
| Operating Pressure Max | — | 115 kPa |
| パッケージ / ケース | — | 8-DIP Module (0.560 inch, 14.22 mm) |
| Media Compatibility | — | Non-corrosive dry gases (media resistant) |
| Temperature Compensation | — | On-chip, factory calibrated |