MPXA6115AC6U vs MPXAZ6115A7U Comparaison
Comparaison détaillée côte à côte de MPXA6115AC6U par NXP Semiconductors et MPXAZ6115A7U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MPXA6115AC6U | MPXAZ6115A7U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,95 | $10,10 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Maximum Over Pressure | [DATA_NEEDED: maximum over pressure rating] | — |
| Plage de tension de sortie | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V |
| Sensitivity | 45.9 mV/kPa (typical) | [DATA_NEEDED: typical sensitivity mV/kPa] |
| Tension d'alimentation | 4.75 V to 5.25 V | 5.0 V typical |
| Courant d'alimentation | [DATA_NEEDED: supply current typical] | — |
| Accuracy | ±1.5% (0°C to +85°C) | ±1.5% (0C to 85C, after NXP factory calibration) |
| Température de fonctionnement | -40°C to +125°C | -40C to +125C |
| Response Time | 1.0 ms (typical) | — |
| Port Style | Single axial top port, 0.13" (3.17 mm) tube | Top axial tube, 0.13" (3.17 mm) diameter |
| Boîtier | 8-SMD, Gull Wing (Case 1320-02, SOP-8) | — |
| Type de montage | Surface Mount | Through-Hole |
| Type de sortie | Analog, ratiometric | Analog Voltage |
| Signal Conditioning | On-chip bipolar op-amp, temperature compensated | On-chip bipolar op-amp + thin-film resistor network |
| Element Type | Piezoresistive MEMS silicon | — |
| Statut RoHS | Compliant | Compliant |
| Operating Pressure Min | — | 15 kPa |
| Operating Pressure Max | — | 115 kPa |
| Boîtier / Format | — | 8-DIP Module (0.560 inch, 14.22 mm) |
| Media Compatibility | — | Non-corrosive dry gases (media resistant) |
| Temperature Compensation | — | On-chip, factory calibrated |