MPXAZ6115A7U vs MPXAZ6115AC6U Comparison
Detailed side-by-side comparison of MPXAZ6115A7U by NXP Semiconductors and MPXAZ6115AC6U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MPXAZ6115A7U | MPXAZ6115AC6U |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.10 | $8.40 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Output Type | Analog Voltage | Analog Voltage |
| Output Voltage Range | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Supply Voltage | 5.0 V typical | 5.0 V typical (4.75 V to 5.25 V) |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | — |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | +/-1.5% Vfss (max) |
| Operating Temperature | -40C to +125C | -40C to +125C |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | Top Port, Male 0.13" (3.17 mm) Tube |
| Package / Case | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| Mounting Type | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | Media Resistant (dry gases, isolated from harsh media) |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | On-chip bipolar op-amp + thin-film resistor networks |
| Temperature Compensation | On-chip, factory calibrated | Built-in (calibrated across full range) |
| RoHS Status | Compliant | Compliant |
| Supply Current | — | [DATA_NEEDED: supply current typical mA] |
| Port Type | — | Single Axial Barbed |
| Package | — | 8-SMD, Gull Wing, Top Port |