MPXAZ6115A7U vs MPXAZ6115AC6U 比較
詳細な並列比較: MPXAZ6115A7U メーカー: NXP Semiconductors および MPXAZ6115AC6U メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MPXAZ6115A7U | MPXAZ6115AC6U |
|---|---|---|
| ブランド | NXP Semiconductors | NXP Semiconductors |
| カテゴリ | Pressure Sensors | Pressure Sensors |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $10.10 | $8.40 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| 出力タイプ | Analog Voltage | Analog Voltage |
| 出力電圧範囲 | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| 電源電圧 | 5.0 V typical | 5.0 V typical (4.75 V to 5.25 V) |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | — |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | +/-1.5% Vfss (max) |
| 動作温度 | -40C to +125C | -40C to +125C |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | Top Port, Male 0.13" (3.17 mm) Tube |
| パッケージ / ケース | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| 実装タイプ | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | Media Resistant (dry gases, isolated from harsh media) |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | On-chip bipolar op-amp + thin-film resistor networks |
| Temperature Compensation | On-chip, factory calibrated | Built-in (calibrated across full range) |
| RoHS ステータス | Compliant | Compliant |
| 電源電流 | — | [DATA_NEEDED: supply current typical mA] |
| Port Type | — | Single Axial Barbed |
| パッケージ | — | 8-SMD, Gull Wing, Top Port |