MPXAZ6115A7U vs MPXAZ6115AC6U Vergleich
Detaillierter Direktvergleich von MPXAZ6115A7U von NXP Semiconductors und MPXAZ6115AC6U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPXAZ6115A7U | MPXAZ6115AC6U |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,10 | $8,40 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Ausgangstyp | Analog Voltage | Analog Voltage |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Versorgungsspannung | 5.0 V typical | 5.0 V typical (4.75 V to 5.25 V) |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | — |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | +/-1.5% Vfss (max) |
| Betriebstemperatur | -40C to +125C | -40C to +125C |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | Top Port, Male 0.13" (3.17 mm) Tube |
| Gehäuse / Bauform | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| Montageart | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | Media Resistant (dry gases, isolated from harsh media) |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | On-chip bipolar op-amp + thin-film resistor networks |
| Temperature Compensation | On-chip, factory calibrated | Built-in (calibrated across full range) |
| RoHS-Status | Compliant | Compliant |
| Versorgungsstrom | — | [DATA_NEEDED: supply current typical mA] |
| Port Type | — | Single Axial Barbed |
| Gehäuse | — | 8-SMD, Gull Wing, Top Port |