MPXAZ6115A7U vs MPXAZ6115AP Comparison
Detailed side-by-side comparison of MPXAZ6115A7U by NXP Semiconductors and MPXAZ6115AP by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MPXAZ6115AP - 15-115 kPa Absolute Pressure Sensor, Side Port | NXP
MPXAZ6115AP ✓ ActiveSpecification Comparison
| Parameter | MPXAZ6115A7U | MPXAZ6115AP |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.10 | $10.30 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Output Type | Analog Voltage | Analog Voltage |
| Output Voltage Range | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Supply Voltage | 5.0 V typical | 4.75 V to 5.25 V (5 V nominal) |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | — |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | +/-1.5% |
| Operating Temperature | -40C to +125C | -40 C to +125 C |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | Male 0.13 in (3.17 mm) tube, side-mounted |
| Package / Case | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| Mounting Type | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Temperature Compensation | On-chip, factory calibrated | On-chip, -40 C to +125 C |
| RoHS Status | Compliant | Compliant |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Package | — | 8-SMD, Gull Wing, Side Port (SOP-8) |
| Technology | — | Piezoresistive silicon, monolithic with on-chip bipolar op-amp |
| Port Material | — | PPS thermoplastic (media resistant) |