MPXAZ6115A7U vs MPXAZ6115AP Vergleich
Detaillierter Direktvergleich von MPXAZ6115A7U von NXP Semiconductors und MPXAZ6115AP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPXAZ6115AP - 15-115 kPa Absolute Pressure Sensor, Side Port | NXP
MPXAZ6115AP ✓ AktivSpezifikationsvergleich
| Parameter | MPXAZ6115A7U | MPXAZ6115AP |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,10 | $10,30 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Ausgangstyp | Analog Voltage | Analog Voltage |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Versorgungsspannung | 5.0 V typical | 4.75 V to 5.25 V (5 V nominal) |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | — |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | +/-1.5% |
| Betriebstemperatur | -40C to +125C | -40 C to +125 C |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | Male 0.13 in (3.17 mm) tube, side-mounted |
| Gehäuse / Bauform | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| Montageart | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Temperature Compensation | On-chip, factory calibrated | On-chip, -40 C to +125 C |
| RoHS-Status | Compliant | Compliant |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Gehäuse | — | 8-SMD, Gull Wing, Side Port (SOP-8) |
| Technology | — | Piezoresistive silicon, monolithic with on-chip bipolar op-amp |
| Port Material | — | PPS thermoplastic (media resistant) |