MPXH6115AC6U vs MPXH6115AC6T1 Comparison

Detailed side-by-side comparison of MPXH6115AC6U by NXP Semiconductors and MPXH6115AC6T1 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MPXH6115AC6U MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC

MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC

MPXH6115AC6U ✓ Active

Specification Comparison

Parameter MPXH6115AC6U MPXH6115AC6T1
Brand NXP Semiconductors STMicroelectronics
Category Pressure Sensors Pressure Sensors
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $5.75 $5.85
Pressure Type Absolute Absolute
Operating Pressure Range 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI)
Output Voltage Range 0.2 V to 4.7 V (at 5 V supply) —
Supply Voltage 4.75 V to 5.25 V (5 V typical) —
Sensitivity 45.9 mV/kPa (typical) —
Package 8-SOIC (0.335 inch, 8.50 mm width) Top Port —
Port Type Male - 0.13 inch (3.3 mm) Tube, Top —
Operating Temperature Range -40 C to +125 C —
Compensated Temperature Range 0 C to +85 C —
Signal Conditioning On-chip bipolar op-amp + thin-film resistor network —
Output Type Analog, ratiometric to VCC Analog, ratiometric
Mounting Type Surface Mount Surface Mount
Technology Piezoresistive MEMS, monolithic silicon —
Port Orientation Top-side vertical —
MSL Level [DATA_NEEDED: MSL rating] [DATA_NEEDED: MSL level]
RoHS Status Compliant Compliant
Maximum Overload Pressure — [DATA_NEEDED: maximum overload pressure]
Output Voltage Span — 0.2 V to 4.7 V (at VCC = 5.0 V)
Supply Voltage (VCC) — 4.75 V to 5.25 V
Supply Current — [DATA_NEEDED: typical supply current]
Accuracy — 1.5% (over compensated temperature range)
Temperature Compensation Range — -40 C to +125 C
Package / Case — 8-SSOP (0.335", 8.50 mm width), Top Port
Pressure Port — Male 0.13" (3.3 mm) tube, top-side
Operating Temperature — -40 C to +125 C
Media Compatibility — Dry gases (non-corrosive)

Datasheets & Resources

Browse All Products Create BOM Request Quote