MPXH6115AC6U vs MPXH6115AC6T1 Comparaison
Comparaison détaillée côte à côte de MPXH6115AC6U par NXP Semiconductors et MPXH6115AC6T1 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC
MPXH6115AC6U ✓ ActifSTMicroelectronics
MPXH6115AC6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6115AC6T1 ✓ ActifComparaison des spécifications
| Paramètre | MPXH6115AC6U | MPXH6115AC6T1 |
|---|---|---|
| Marque | NXP Semiconductors | STMicroelectronics |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,75 | $5,85 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Plage de tension de sortie | 0.2 V to 4.7 V (at 5 V supply) | — |
| Tension d'alimentation | 4.75 V to 5.25 V (5 V typical) | — |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| Boîtier | 8-SOIC (0.335 inch, 8.50 mm width) Top Port | — |
| Port Type | Male - 0.13 inch (3.3 mm) Tube, Top | — |
| Plage de température de fonctionnement | -40 C to +125 C | — |
| Compensated Temperature Range | 0 C to +85 C | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Type de sortie | Analog, ratiometric to VCC | Analog, ratiometric |
| Type de montage | Surface Mount | Surface Mount |
| Technology | Piezoresistive MEMS, monolithic silicon | — |
| Port Orientation | Top-side vertical | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL level] |
| Statut RoHS | Compliant | Compliant |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Span | — | 0.2 V to 4.7 V (at VCC = 5.0 V) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Courant d'alimentation | — | [DATA_NEEDED: typical supply current] |
| Accuracy | — | 1.5% (over compensated temperature range) |
| Temperature Compensation Range | — | -40 C to +125 C |
| Boîtier / Format | — | 8-SSOP (0.335", 8.50 mm width), Top Port |
| Pressure Port | — | Male 0.13" (3.3 mm) tube, top-side |
| Température de fonctionnement | — | -40 C to +125 C |
| Media Compatibility | — | Dry gases (non-corrosive) |