MPXH6115AC6U vs MPXH6115AC6T1 Vergleich
Detaillierter Direktvergleich von MPXH6115AC6U von NXP Semiconductors und MPXH6115AC6T1 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC
MPXH6115AC6U ✓ AktivSTMicroelectronics
MPXH6115AC6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6115AC6T1 ✓ AktivSpezifikationsvergleich
| Parameter | MPXH6115AC6U | MPXH6115AC6T1 |
|---|---|---|
| Marke | NXP Semiconductors | STMicroelectronics |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,75 | $5,85 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V (at 5 V supply) | — |
| Versorgungsspannung | 4.75 V to 5.25 V (5 V typical) | — |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| Gehäuse | 8-SOIC (0.335 inch, 8.50 mm width) Top Port | — |
| Port Type | Male - 0.13 inch (3.3 mm) Tube, Top | — |
| Betriebstemperaturbereich | -40 C to +125 C | — |
| Compensated Temperature Range | 0 C to +85 C | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Ausgangstyp | Analog, ratiometric to VCC | Analog, ratiometric |
| Montageart | Surface Mount | Surface Mount |
| Technology | Piezoresistive MEMS, monolithic silicon | — |
| Port Orientation | Top-side vertical | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL level] |
| RoHS-Status | Compliant | Compliant |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Span | — | 0.2 V to 4.7 V (at VCC = 5.0 V) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Versorgungsstrom | — | [DATA_NEEDED: typical supply current] |
| Accuracy | — | 1.5% (over compensated temperature range) |
| Temperature Compensation Range | — | -40 C to +125 C |
| Gehäuse / Bauform | — | 8-SSOP (0.335", 8.50 mm width), Top Port |
| Pressure Port | — | Male 0.13" (3.3 mm) tube, top-side |
| Betriebstemperatur | — | -40 C to +125 C |
| Media Compatibility | — | Dry gases (non-corrosive) |