MPXV5004GC7U vs MPXV10GC7U Comparison
Detailed side-by-side comparison of MPXV5004GC7U by NXP Semiconductors and MPXV10GC7U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP
MPXV5004GC7U ✓ ActiveSpecification Comparison
| Parameter | MPXV5004GC7U | MPXV10GC7U |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $7.10 | $6.10 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 3.92 kPa (0 to 0.57 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overpressure | 16 kPa | [DATA_NEEDED: maximum overpressure rating] |
| Supply Voltage | 4.75 V to 5.25 V (5 V typical) | 3 V to 6 V (3 V typical excitation) |
| Output Voltage Range | 1 V to 4.9 V | — |
| Sensitivity | 1 V/kPa (typical) | 3.5 mV/kPa nominal |
| Accuracy | +/- 1.5 percent VFSS | — |
| Operating Temperature | 0 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Storage Temperature | -30 C to +100 C | — |
| Port Type | Top port tube, 0.13 inch (3.17 mm) diameter | — |
| Output Type | Analog, ratiometric voltage | Analog Wheatstone Bridge (uncompensated mV) |
| Package | 8-pin DIP, 0.550 inch (13.97 mm), through-hole | 8-DIP (0.550", 13.97 mm) through-hole |
| Media Compatibility | Dry non-corrosive gases | Dry non-corrosive gases (reference port vented to ambient) |
| Mounting Type | Through-hole | Through-Hole |
| RoHS Status | [DATA_NEEDED: rohs_status] | [DATA_NEEDED: RoHS compliance] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Supply Current | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Compensation | — | None on chip - external calibration required |