MPXV5004GC7U vs MPXV10GC7U Comparaison
Comparaison détaillée côte à côte de MPXV5004GC7U par NXP Semiconductors et MPXV10GC7U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP
MPXV5004GC7U ✓ ActifComparaison des spécifications
| Paramètre | MPXV5004GC7U | MPXV10GC7U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,10 | $6,10 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 3.92 kPa (0 to 0.57 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overpressure | 16 kPa | [DATA_NEEDED: maximum overpressure rating] |
| Tension d'alimentation | 4.75 V to 5.25 V (5 V typical) | 3 V to 6 V (3 V typical excitation) |
| Plage de tension de sortie | 1 V to 4.9 V | — |
| Sensitivity | 1 V/kPa (typical) | 3.5 mV/kPa nominal |
| Accuracy | +/- 1.5 percent VFSS | — |
| Température de fonctionnement | 0 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Storage Temperature | -30 C to +100 C | — |
| Port Type | Top port tube, 0.13 inch (3.17 mm) diameter | — |
| Type de sortie | Analog, ratiometric voltage | Analog Wheatstone Bridge (uncompensated mV) |
| Boîtier | 8-pin DIP, 0.550 inch (13.97 mm), through-hole | 8-DIP (0.550", 13.97 mm) through-hole |
| Media Compatibility | Dry non-corrosive gases | Dry non-corrosive gases (reference port vented to ambient) |
| Type de montage | Through-hole | Through-Hole |
| Statut RoHS | [DATA_NEEDED: rohs_status] | [DATA_NEEDED: RoHS compliance] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Compensation | — | None on chip - external calibration required |