MPXV5004GC7U vs MPXV10GC7U Comparación
Comparación detallada lado a lado de MPXV5004GC7U por NXP Semiconductors y MPXV10GC7U por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP
MPXV5004GC7U ✓ ActivoComparación de especificaciones
| Parámetro | MPXV5004GC7U | MPXV10GC7U |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Pressure Sensors | Pressure Sensors |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $7,10 | $6,10 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 3.92 kPa (0 to 0.57 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overpressure | 16 kPa | [DATA_NEEDED: maximum overpressure rating] |
| Tensión de alimentación | 4.75 V to 5.25 V (5 V typical) | 3 V to 6 V (3 V typical excitation) |
| Rango de tensión de salida | 1 V to 4.9 V | — |
| Sensitivity | 1 V/kPa (typical) | 3.5 mV/kPa nominal |
| Accuracy | +/- 1.5 percent VFSS | — |
| Temperatura de funcionamiento | 0 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Storage Temperature | -30 C to +100 C | — |
| Port Type | Top port tube, 0.13 inch (3.17 mm) diameter | — |
| Tipo de salida | Analog, ratiometric voltage | Analog Wheatstone Bridge (uncompensated mV) |
| Encapsulado | 8-pin DIP, 0.550 inch (13.97 mm), through-hole | 8-DIP (0.550", 13.97 mm) through-hole |
| Media Compatibility | Dry non-corrosive gases | Dry non-corrosive gases (reference port vented to ambient) |
| Tipo de montaje | Through-hole | Through-Hole |
| Estado RoHS | [DATA_NEEDED: rohs_status] | [DATA_NEEDED: RoHS compliance] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Corriente de alimentación | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Compensation | — | None on chip - external calibration required |