MPXV5010GC7U vs MPVZ5010G7U Comparison
Detailed side-by-side comparison of MPXV5010GC7U by NXP Semiconductors and MPVZ5010G7U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ ActiveSpecification Comparison
| Parameter | MPXV5010GC7U | MPVZ5010G7U |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.05 | $7.25 |
| Pressure Type | Differential / Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating in kPa] | — |
| Supply Voltage | 4.75 V to 5.25 V (typ. 5.0 V) | — |
| Full-Scale Output (typ. @10 kPa) | 4.5 V | — |
| Zero-Pressure Offset | 0.2 V to 0.85 V | — |
| Supply Current (typ.) | [DATA_NEEDED: supply current in mA] | — |
| Operating Temperature Range | 0 °C to +85 °C | 0 °C to +85 °C |
| Storage Temperature Range | -30 °C to +100 °C | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] |
| Output Type | Analog (ratiometric to VCC) | Analog, ratiometric to Vcc |
| Output Impedance | < 50 ohm | — |
| Accuracy (typ.) | ±5 % of V_FSS (0-85 °C) | — |
| Response Time | [DATA_NEEDED: response time in ms] | [DATA_NEEDED: response time ms] |
| Package / Case | SOP-8 (Case 1737), Surface Mount | — |
| Port Configuration | Dual axial horizontal ports (gauge) | — |
| Media Compatibility | Non-corrosive, non-ionic media (dry air, dry gases) | — |
| Mounting Type | Surface Mount | Through-Hole (DIP module with vent tube) |
| RoHS Status | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V (5 V typical) |
| Supply Current | — | 10 mA (maximum) |
| Analog Output Range | — | 0.2 V to 4.7 V |
| Accuracy | — | ±1.5 %FS (0 °C to 85 °C) |
| Compensated Temperature Range | — | -10 °C to +60 °C |
| Package | — | 8-DIP Module (Case 1368-01, through-hole) |
| Sensor Technology | — | Piezoresistive silicon micromachined |
| Signal Conditioning | — | On-chip, temperature compensated, calibrated |
| MSL Level | — | [DATA_NEEDED: MSL rating] |
| Body Height | — | 5.46 mm |