MPXV5010GC7U vs MPVZ5010G7U Comparaison
Comparaison détaillée côte à côte de MPXV5010GC7U par NXP Semiconductors et MPVZ5010G7U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ ActifComparaison des spécifications
| Paramètre | MPXV5010GC7U | MPVZ5010G7U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,05 | $7,25 |
| Pressure Type | Differential / Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating in kPa] | — |
| Tension d'alimentation | 4.75 V to 5.25 V (typ. 5.0 V) | — |
| Full-Scale Output (typ. @10 kPa) | 4.5 V | — |
| Zero-Pressure Offset | 0.2 V to 0.85 V | — |
| Supply Current (typ.) | [DATA_NEEDED: supply current in mA] | — |
| Plage de température de fonctionnement | 0 °C to +85 °C | 0 °C to +85 °C |
| Storage Temperature Range | -30 °C to +100 °C | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] |
| Type de sortie | Analog (ratiometric to VCC) | Analog, ratiometric to Vcc |
| Output Impedance | < 50 ohm | — |
| Accuracy (typ.) | ±5 % of V_FSS (0-85 °C) | — |
| Response Time | [DATA_NEEDED: response time in ms] | [DATA_NEEDED: response time ms] |
| Boîtier / Format | SOP-8 (Case 1737), Surface Mount | — |
| Port Configuration | Dual axial horizontal ports (gauge) | — |
| Media Compatibility | Non-corrosive, non-ionic media (dry air, dry gases) | — |
| Type de montage | Surface Mount | Through-Hole (DIP module with vent tube) |
| Statut RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V (5 V typical) |
| Courant d'alimentation | — | 10 mA (maximum) |
| Analog Output Range | — | 0.2 V to 4.7 V |
| Accuracy | — | ±1.5 %FS (0 °C to 85 °C) |
| Compensated Temperature Range | — | -10 °C to +60 °C |
| Boîtier | — | 8-DIP Module (Case 1368-01, through-hole) |
| Sensor Technology | — | Piezoresistive silicon micromachined |
| Signal Conditioning | — | On-chip, temperature compensated, calibrated |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Body Height | — | 5.46 mm |