MPXV5010GC7U vs MPVZ5010G7U Vergleich
Detaillierter Direktvergleich von MPXV5010GC7U von NXP Semiconductors und MPVZ5010G7U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ AktivSpezifikationsvergleich
| Parameter | MPXV5010GC7U | MPVZ5010G7U |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,05 | $7,25 |
| Pressure Type | Differential / Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating in kPa] | — |
| Versorgungsspannung | 4.75 V to 5.25 V (typ. 5.0 V) | — |
| Full-Scale Output (typ. @10 kPa) | 4.5 V | — |
| Zero-Pressure Offset | 0.2 V to 0.85 V | — |
| Supply Current (typ.) | [DATA_NEEDED: supply current in mA] | — |
| Betriebstemperaturbereich | 0 °C to +85 °C | 0 °C to +85 °C |
| Storage Temperature Range | -30 °C to +100 °C | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] |
| Ausgangstyp | Analog (ratiometric to VCC) | Analog, ratiometric to Vcc |
| Output Impedance | < 50 ohm | — |
| Accuracy (typ.) | ±5 % of V_FSS (0-85 °C) | — |
| Response Time | [DATA_NEEDED: response time in ms] | [DATA_NEEDED: response time ms] |
| Gehäuse / Bauform | SOP-8 (Case 1737), Surface Mount | — |
| Port Configuration | Dual axial horizontal ports (gauge) | — |
| Media Compatibility | Non-corrosive, non-ionic media (dry air, dry gases) | — |
| Montageart | Surface Mount | Through-Hole (DIP module with vent tube) |
| RoHS-Status | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V (5 V typical) |
| Versorgungsstrom | — | 10 mA (maximum) |
| Analog Output Range | — | 0.2 V to 4.7 V |
| Accuracy | — | ±1.5 %FS (0 °C to 85 °C) |
| Compensated Temperature Range | — | -10 °C to +60 °C |
| Gehäuse | — | 8-DIP Module (Case 1368-01, through-hole) |
| Sensor Technology | — | Piezoresistive silicon micromachined |
| Signal Conditioning | — | On-chip, temperature compensated, calibrated |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |
| Body Height | — | 5.46 mm |