MPXV5050DP vs MPXV5050VC6T1 Comparison

Detailed side-by-side comparison of MPXV5050DP by NXP Semiconductors and MPXV5050VC6T1 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

STMicroelectronics
MPXV5050VC6T1 MPXV5050VC6T1 - 50 kPa Vacuum Pressure Sensor, 5V, SOP-8

MPXV5050VC6T1 - 50 kPa Vacuum Pressure Sensor, 5V, SOP-8

MPXV5050VC6T1 ✓ Active

Specification Comparison

Parameter MPXV5050DP MPXV5050VC6T1
Brand NXP Semiconductors STMicroelectronics
Category Pressure Sensors Pressure Sensors
Lifecycle Status Active Active
Pressure Type Differential Vacuum / Negative Gauge
Operating Pressure Range 0 kPa to 50 kPa (0 psi to 7.25 psi) 0 to -50 kPa (0 to -7.25 PSI)
Maximum Overload Pressure 200 kPa —
Supply Voltage (Vdd) 4.75 V to 5.25 V (5 V typical, max 6.0 V) —
Supply Current [DATA_NEEDED: supply current] 5 mA typical
Output Type / Interface Analog ratiometric voltage —
Output Voltage Range 0.2 V to 4.7 V at Vdd = 5 V —
Output Function Vout = 5 V x (0.009 x P_kPa - 0.045) —
Accuracy [DATA_NEEDED: accuracy (%FSO)] ±5% (0°C to 85°C) [DATA_NEEDED: full accuracy spec]
Port Configuration Dual ports, same side (differential) Top port, vertical tube, 0.13" (3.17 mm) tube
Port Tube Diameter 3.3 mm (0.13 in) —
Operating Temperature 0 C to +85 C -40°C to +85°C [DATA_NEEDED: full operating range]
Package Type 8-BSOP (SO8), SOT1693-1, 12.06 mm x 12.06 mm —
Mounting Type Surface Mount Surface Mount
AEC-Q100 Qualification Yes —
RoHS Status [DATA_NEEDED: RoHS status] Compliant (verified via distributor page)
Maximum Overpressure — 200 kPa
Supply Voltage (VCC) — 4.75 V to 5.25 V (typical 5.0 V)
Analog Output Range — 0.1 V to 4.6 V at 5 V supply (ratiometric)
Sensitivity — 90 mV/kPa
Output Type — Ratiometric analog, single-ended
Storage Temperature — [DATA_NEEDED: storage temperature]
Response Time — [DATA_NEEDED: response time]
Package / Case — 8-SMD, Gull Wing, SOP-8 (case 1737-02) [DATA_NEEDED: case dimensions]
On-Chip Signal Conditioning — Yes (amplified, temperature-compensated, calibrated)
Technology — Piezoresistive MEMS with bipolar op-amp network

Datasheets & Resources

Browse All Products Create BOM Request Quote