MPXV5050DP vs MPXV5050VC6T1 Comparaison

Comparaison détaillée côte à côte de MPXV5050DP par NXP Semiconductors et MPXV5050VC6T1 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

STMicroelectronics
MPXV5050VC6T1 MPXV5050VC6T1 - 50 kPa Vacuum Pressure Sensor, 5V, SOP-8

MPXV5050VC6T1 - 50 kPa Vacuum Pressure Sensor, 5V, SOP-8

MPXV5050VC6T1 ✓ Actif

Comparaison des spécifications

Paramètre MPXV5050DP MPXV5050VC6T1
Marque NXP Semiconductors STMicroelectronics
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Pressure Type Differential Vacuum / Negative Gauge
Operating Pressure Range 0 kPa to 50 kPa (0 psi to 7.25 psi) 0 to -50 kPa (0 to -7.25 PSI)
Maximum Overload Pressure 200 kPa —
Supply Voltage (Vdd) 4.75 V to 5.25 V (5 V typical, max 6.0 V) —
Courant d'alimentation [DATA_NEEDED: supply current] 5 mA typical
Output Type / Interface Analog ratiometric voltage —
Plage de tension de sortie 0.2 V to 4.7 V at Vdd = 5 V —
Output Function Vout = 5 V x (0.009 x P_kPa - 0.045) —
Accuracy [DATA_NEEDED: accuracy (%FSO)] ±5% (0°C to 85°C) [DATA_NEEDED: full accuracy spec]
Port Configuration Dual ports, same side (differential) Top port, vertical tube, 0.13" (3.17 mm) tube
Port Tube Diameter 3.3 mm (0.13 in) —
Température de fonctionnement 0 C to +85 C -40°C to +85°C [DATA_NEEDED: full operating range]
Package Type 8-BSOP (SO8), SOT1693-1, 12.06 mm x 12.06 mm —
Type de montage Surface Mount Surface Mount
AEC-Q100 Qualification Yes —
Statut RoHS [DATA_NEEDED: RoHS status] Compliant (verified via distributor page)
Maximum Overpressure — 200 kPa
Supply Voltage (VCC) — 4.75 V to 5.25 V (typical 5.0 V)
Analog Output Range — 0.1 V to 4.6 V at 5 V supply (ratiometric)
Sensitivity — 90 mV/kPa
Type de sortie — Ratiometric analog, single-ended
Storage Temperature — [DATA_NEEDED: storage temperature]
Response Time — [DATA_NEEDED: response time]
Boîtier / Format — 8-SMD, Gull Wing, SOP-8 (case 1737-02) [DATA_NEEDED: case dimensions]
On-Chip Signal Conditioning — Yes (amplified, temperature-compensated, calibrated)
Technology — Piezoresistive MEMS with bipolar op-amp network

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis