MW4IC2230NBR1 vs MW4IC2230MBR5 Comparison

Detailed side-by-side comparison of MW4IC2230NBR1 by NXP Semiconductors and MW4IC2230MBR5 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MW4IC2230NBR1 MW4IC2230NBR1 - 30W W-CDMA RF Power Amplifier, 1.6-2.4 GHz | NXP

MW4IC2230NBR1 - 30W W-CDMA RF Power Amplifier, 1.6-2.4 GHz | NXP

MW4IC2230NBR1 Obsolete
NXP Semiconductors
MW4IC2230MBR5 MW4IC2230MBR5 - 30W RF LDMOS Power Amp 1.6-2.4GHz | NXP

MW4IC2230MBR5 - 30W RF LDMOS Power Amp 1.6-2.4GHz | NXP

MW4IC2230MBR5 Obsolete

Specification Comparison

Parameter MW4IC2230NBR1 MW4IC2230MBR5
Brand NXP Semiconductors NXP Semiconductors
Category RF Amplifiers RF Amplifiers
Lifecycle Status Obsolete Obsolete
Stock Status In Stock In Stock
Unit Price (USD) $32.00 $29.85
Technology LDMOS (High Voltage, multi-stage integrated) LDMOS (Laterally Diffused MOSFET)
Frequency Range 1.6 GHz to 2.4 GHz (usable); 2110-2170 MHz target band 1.6 GHz to 2.4 GHz
Test Frequency 2.14 GHz —
Supply Voltage (Drain) 26 V to 28 V —
Supply Current (Quiescent) 60 mA nominal —
Small-Signal Gain 31 dB typical —
Output Power (P1dB / Pout) [DATA_NEEDED: P1dB / saturated Pout at W-CDMA] —
Power Added Efficiency [DATA_NEEDED: PAE typical] —
Modulation Support W-CDMA, CDMA, EDGE, GSM, TDMA —
Input Impedance 50 ohm (internally matched) —
Package TO-272 WB-16 (over-molded plastic, flange mount) —
Mounting Type Surface / chassis mount via flange Surface Mount (with heatsink)
Maximum Operating Temperature 85 C —
Pin Count 16 —
RoHS Status [DATA_NEEDED: RoHS / lead-free status from NXP product page] [DATA_NEEDED: rohs status]
Application Cellular base-station RF power amplifier —
Lead Configuration Flat leads (TO-272-16 Variant) —
Manufacturer — NXP Semiconductors (formerly Freescale)
Part Type — RF LDMOS Wideband Integrated Power Amplifier
Output Power (Pout) — 30 W (CW)
Power Gain — 31 dB (typical)
Supply Voltage (Vdd) — 26 V nominal
Quiescent Current (Idq) — 60 mA
Package / Case — TO-272 WB-16 Variant, Flat Leads (over-molded plastic)
Operating Mode — Class AB (typical)
Supported Air Interfaces — Cellular, CDMA, EDGE, GSM, TDMA, W-CDMA
Input Matching — Internal wideband matching network
Lead Finish — [DATA_NEEDED: lead finish]
MSL Level — [DATA_NEEDED: MSL level]

Datasheets & Resources

Browse All Products Create BOM Request Quote