MW7IC2040GNR1 vs MW7IC2240NR1 Comparison
Detailed side-by-side comparison of MW7IC2040GNR1 by NXP Semiconductors and MW7IC2240NR1 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MW7IC2040GNR1 | MW7IC2240NR1 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | RF Amplifiers | RF Amplifiers |
| Lifecycle Status | Obsolete | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $17.50 | $13.16 |
| Manufacturer | NXP Semiconductors (formerly Freescale/Motorola) | — |
| Part Family | MW7IC2040 (NR1 / GNR1 / NBR1) | — |
| Device Type | RF LDMOS Wideband Integrated Power Amplifier | — |
| Frequency Range | 1805 MHz to 1990 MHz | 2110 MHz to 2170 MHz (usable 2000-2200 MHz) |
| Output Power (CW) | 4 W typical | — |
| Power Supply Voltage | 24 V to 32 V (28 V nominal) | — |
| Quiescent Current | 75 mA (typical, per web data) | — |
| Small-Signal Gain | 23.5 dB (typical at 1.99 GHz, per web data) | — |
| RF Type | General Purpose / Cellular Base Station PA | — |
| Modulation Support | W-CDMA, GSM/EDGE, multi-carrier cellular | — |
| On-Chip Matching | Yes (input/output 50 ohm) | Yes (input 50 ohm DC-blocked, partial output) |
| Number of Stages | 2 (multi-stage integrated) | — |
| Technology | LDMOS (Laterally Diffused MOS) | LDMOS (Laterally Diffused MOSFET) |
| Package / Case | TO-270-16 Variant, Gull Wing (TO-270 WBL-16) | — |
| Package Body Material | Plastic / Epoxy overmold | — |
| Mounting Type | Surface Mount (Gull Wing leads) | Surface Mount / flange mount with ground pad |
| Packaging | Tape & Reel | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | Yes (integrated) | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | — |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Halogen Free | Not Compliant (per GlobalSpec listing) | — |
| Function | — | RF Power Amplifier (W-CDMA, multi-stage) |
| Average Output Power | — | 4 W (W-CDMA, 28 V) |
| Power Gain (Min) | — | 15 dB |
| Drain Supply Voltage | — | 24 V to 32 V (28 V typical) |
| Input VSWR | — | 5:1 |
| Output VSWR | — | 5:1 |
| Nominal Impedance | — | 50 ohm (DC-blocked input, >3 ohm output) |
| Spurious Emissions | — | Below -60 dBc from 100 mW to 10 W CW Pout |
| Quiescent Current Compensation | — | Integrated with temperature compensation |
| Enable Function | — | Yes |
| Package | — | TO-270 WBL-16 (TO-270WB16), 16-pin ceramic |
| Operating Modulation Formats | — | W-CDMA, TD-SCDMA, LTE-FDD, multi-carrier |