MW7IC2040GNR1 vs MW7IC2240NR1 Comparaison
Comparaison détaillée côte à côte de MW7IC2040GNR1 par NXP Semiconductors et MW7IC2240NR1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MW7IC2040GNR1 | MW7IC2240NR1 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | RF Amplifiers | RF Amplifiers |
| Statut du cycle de vie | Obsolete | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $17,50 | $13,16 |
| Manufacturer | NXP Semiconductors (formerly Freescale/Motorola) | — |
| Part Family | MW7IC2040 (NR1 / GNR1 / NBR1) | — |
| Device Type | RF LDMOS Wideband Integrated Power Amplifier | — |
| Frequency Range | 1805 MHz to 1990 MHz | 2110 MHz to 2170 MHz (usable 2000-2200 MHz) |
| Output Power (CW) | 4 W typical | — |
| Power Supply Voltage | 24 V to 32 V (28 V nominal) | — |
| Courant de repos | 75 mA (typical, per web data) | — |
| Small-Signal Gain | 23.5 dB (typical at 1.99 GHz, per web data) | — |
| RF Type | General Purpose / Cellular Base Station PA | — |
| Modulation Support | W-CDMA, GSM/EDGE, multi-carrier cellular | — |
| On-Chip Matching | Yes (input/output 50 ohm) | Yes (input 50 ohm DC-blocked, partial output) |
| Number of Stages | 2 (multi-stage integrated) | — |
| Technology | LDMOS (Laterally Diffused MOS) | LDMOS (Laterally Diffused MOSFET) |
| Boîtier / Format | TO-270-16 Variant, Gull Wing (TO-270 WBL-16) | — |
| Package Body Material | Plastic / Epoxy overmold | — |
| Type de montage | Surface Mount (Gull Wing leads) | Surface Mount / flange mount with ground pad |
| Packaging | Tape & Reel | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | Yes (integrated) | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Sans halogène | Not Compliant (per GlobalSpec listing) | — |
| Fonction | — | RF Power Amplifier (W-CDMA, multi-stage) |
| Average Output Power | — | 4 W (W-CDMA, 28 V) |
| Power Gain (Min) | — | 15 dB |
| Drain Supply Voltage | — | 24 V to 32 V (28 V typical) |
| Input VSWR | — | 5:1 |
| Output VSWR | — | 5:1 |
| Nominal Impedance | — | 50 ohm (DC-blocked input, >3 ohm output) |
| Spurious Emissions | — | Below -60 dBc from 100 mW to 10 W CW Pout |
| Quiescent Current Compensation | — | Integrated with temperature compensation |
| Enable Function | — | Yes |
| Boîtier | — | TO-270 WBL-16 (TO-270WB16), 16-pin ceramic |
| Operating Modulation Formats | — | W-CDMA, TD-SCDMA, LTE-FDD, multi-carrier |