MW7IC2040NBR1 vs MW7IC2220NBR1 Comparison
Detailed side-by-side comparison of MW7IC2040NBR1 by NXP Semiconductors and MW7IC2220NBR1 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MW7IC2040NBR1 - 4W RF LDMOS Wideband Power Amplifier | NXP Semiconductors
MW7IC2040NBR1 ✓ ActiveNXP Semiconductors
MW7IC2220NBR1 - 2W W-CDMA RF Power Amplifier 2.11-2.17 GHz | NXP
MW7IC2220NBR1 ✓ ActiveSpecification Comparison
| Parameter | MW7IC2040NBR1 | MW7IC2220NBR1 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | RF Amplifiers | RF Amplifiers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $15.20 | $21.50 |
| RF Type | General Purpose | — |
| Frequency Range | 1930 MHz to 1990 MHz (PCS) / 1805 MHz to 1880 MHz (DCS) | 2000 MHz to 2200 MHz (usable), 2110-2170 MHz (W-CDMA band) |
| Test Frequency | 1990 MHz | — |
| Gain | 23.5 dB (typ at 1990 MHz) | — |
| Output Power (P1dB/avg) | 4 W (family rating) | — |
| Supply Voltage | 24 V to 32 V | — |
| Quiescent Supply Current | 75 mA (typ) | — |
| Package / Case | TO-272-16 Variant, Flat Leads | — |
| Mounting Type | Surface Mount | Surface Mount (flange/over-molded) |
| Technology | RF LDMOS (later-generation, on-chip matching) | RF LDMOS (Laterally Diffused MOSFET) |
| Number of Functions | 1 (multi-stage integrated PA) | — |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | — |
| Storage Temperature | [DATA_NEEDED: storage temperature range] | — |
| Modulation Support | W-CDMA, GSM, EDGE, CW | W-CDMA, TD-SCDMA, LTE, multi-carrier |
| RoHS Status | Compliant (per ETEI / distributor data) | — |
| Function | — | W-CDMA Wideband Integrated Power Amplifier |
| Operating Frequency (typical) | — | 2167.5 MHz |
| Average Output Power | — | 2 W (33 dBm) |
| Drain Supply Voltage (VDD) | — | 28 V (24 V to 32 V operating range) |
| Small-Signal Gain | — | 31 dB (typical at 2.17 GHz) |
| Quiescent Current Stage 1 (IDQ1) | — | 80 mA |
| Quiescent Current Stage 2 (IDQ2) | — | 300 mA |
| Package Type | — | TO-272WB-16 (over-molded plastic) |
| Input Matching | — | On-chip (50 ohm nominal) |
| Output Matching | — | On-chip (50 ohm nominal) |
| Characteristic Impedance | — | 50 ohm |
| Maximum Operating Temperature | — | 150 C |
| Test Signal | — | Single-Carrier W-CDMA, IQ Magnitude Clipping, PAR = 7.5 dB |
| ACPR Measurement | — | 3.84 MHz channel bandwidth at +/-5 MHz offset |