NE5532AD8 vs NE5532DR Comparison
Detailed side-by-side comparison of NE5532AD8 by onsemi and NE5532DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532DR ✓ ActiveSpecification Comparison
| Parameter | NE5532AD8 | NE5532DR |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.25 | $0.00 |
| Number of Channels | 2 (Dual) | — |
| Amplifier Type | Operational Amplifier | Dual low-noise operational amplifier |
| Supply Voltage (Single) | 6 V to 40 V | — |
| Supply Voltage (Dual) | ±3 V to ±20 V | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz [DATA_NEEDED: full noise density figure from datasheet] | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Slew Rate | 9 V/µs typical | 10 V/μs typical |
| Total Harmonic Distortion (THD) | 0.002 % at 1 kHz, 600 Ω load | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage (NE5532A grade)] 0.5 mV typical | — |
| Output Current | [DATA_NEEDED: rated output drive current] | — |
| Channel Separation | 110 dB at 1 kHz typical | — |
| Operating Temperature Range | 0 °C to +70 °C | 0 °C to +70 °C for NE5532x |
| Package | 8-pin SOIC (D8, SO-8), 3.90 mm body width | 8-pin SOIC |
| Mounting Type | Surface Mount | Surface Mount |
| MSL (Moisture Sensitivity Level) | MSL-1 / 1 (unlimited floor life per JEDEC J-STD-020) | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Compensation | Internally compensated (no external cap required) | — |
| Input Protection | Diodes on both inputs | — |
| Output Protection | Short-circuit protection | — |
| Number of Amplifier Circuits | — | 2 circuits |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Supply Current | — | [DATA_NEEDED: supply current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |