NE5532AD8 vs NE5532DR Comparaison

Comparaison détaillée côte à côte de NE5532AD8 par onsemi et NE5532DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Comparaison des spécifications

Paramètre NE5532AD8 NE5532DR
Marque onsemi Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $0,25 $0,00
Number of Channels 2 (Dual) —
Amplifier Type Operational Amplifier Dual low-noise operational amplifier
Supply Voltage (Single) 6 V to 40 V —
Supply Voltage (Dual) ±3 V to ±20 V —
Equivalent Input Noise Voltage 5 nV/√Hz typical at 1 kHz [DATA_NEEDED: full noise density figure from datasheet] 5 nV/√Hz typical at 1 kHz
Unity-Gain Bandwidth 10 MHz typical 10 MHz typical
Slew Rate 9 V/µs typical 10 V/μs typical
Total Harmonic Distortion (THD) 0.002 % at 1 kHz, 600 Ω load —
Input Offset Voltage [DATA_NEEDED: input offset voltage (NE5532A grade)] 0.5 mV typical —
Output Current [DATA_NEEDED: rated output drive current] —
Channel Separation 110 dB at 1 kHz typical —
Plage de température de fonctionnement 0 °C to +70 °C 0 °C to +70 °C for NE5532x
Boîtier 8-pin SOIC (D8, SO-8), 3.90 mm body width 8-pin SOIC
Type de montage Surface Mount Surface Mount
MSL (Moisture Sensitivity Level) MSL-1 / 1 (unlimited floor life per JEDEC J-STD-020) —
Statut RoHS Compliant [DATA_NEEDED: RoHS status]
Lead-Free Yes —
Compensation Internally compensated (no external cap required) —
Input Protection Diodes on both inputs —
Output Protection Short-circuit protection —
Number of Amplifier Circuits — 2 circuits
DC Voltage Gain — 100 V/mV typical
Common-Mode Rejection Ratio — 100 dB typical
Specified Supply Voltage Range — ±5 V to ±15 V
Maximum Total Supply Voltage — 30 V
Output Voltage Swing — 32 V peak-to-peak typical at ±18 V and 600 Ω load
Product Category — Standard general-purpose amplifier
Application Category — Audio applications
Manufacturer — Texas Instruments
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]
Courant d'alimentation — [DATA_NEEDED: supply current]
Input Bias Current — [DATA_NEEDED: input bias current]
Open-Loop Gain — [DATA_NEEDED: open-loop gain at specified frequency]
Noise at 20 Hz to 20 kHz — [DATA_NEEDED: total input noise over audio bandwidth]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis