NE5532AD8 vs NE5532DR Vergleich
Detaillierter Direktvergleich von NE5532AD8 von onsemi und NE5532DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | NE5532AD8 | NE5532DR |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,25 | $0,00 |
| Number of Channels | 2 (Dual) | — |
| Amplifier Type | Operational Amplifier | Dual low-noise operational amplifier |
| Supply Voltage (Single) | 6 V to 40 V | — |
| Supply Voltage (Dual) | ±3 V to ±20 V | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz [DATA_NEEDED: full noise density figure from datasheet] | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Slew Rate | 9 V/µs typical | 10 V/μs typical |
| Total Harmonic Distortion (THD) | 0.002 % at 1 kHz, 600 Ω load | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage (NE5532A grade)] 0.5 mV typical | — |
| Output Current | [DATA_NEEDED: rated output drive current] | — |
| Channel Separation | 110 dB at 1 kHz typical | — |
| Betriebstemperaturbereich | 0 °C to +70 °C | 0 °C to +70 °C for NE5532x |
| Gehäuse | 8-pin SOIC (D8, SO-8), 3.90 mm body width | 8-pin SOIC |
| Montageart | Surface Mount | Surface Mount |
| MSL (Moisture Sensitivity Level) | MSL-1 / 1 (unlimited floor life per JEDEC J-STD-020) | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Compensation | Internally compensated (no external cap required) | — |
| Input Protection | Diodes on both inputs | — |
| Output Protection | Short-circuit protection | — |
| Number of Amplifier Circuits | — | 2 circuits |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |