NE5532AD8R2 vs NE5532AD8 Comparison
Detailed side-by-side comparison of NE5532AD8R2 by onsemi and NE5532AD8 by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | NE5532AD8R2 | NE5532AD8 |
|---|---|---|
| Brand | onsemi | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Internally compensated dual low-noise operational amplifier | — |
| Number of Amplifier Channels | 2 channels | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Supply Voltage Range | ±3 V to ±20 V | — |
| Supply Current | 38 mA per channel | — |
| Input Bias Current | 200 nA | — |
| Input Offset Current | 1 µA maximum | — |
| Common-Mode Rejection Ratio | 70 dB | — |
| Compensation Type | Internally compensated | — |
| Package | 8-pin SOIC | 8-pin SOIC (D8, SO-8), 3.90 mm body width |
| Package Width | 3.90 mm | — |
| Lead Pitch | 0.154 mm as represented in the supplied listing | — |
| Mounting Type | Surface mount | Surface Mount |
| Shipping Configuration | Tape and reel ordering code | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 9 V/µs typical |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| Number of Channels | — | 2 (Dual) |
| Amplifier Type | — | Operational Amplifier |
| Supply Voltage (Single) | — | 6 V to 40 V |
| Supply Voltage (Dual) | — | ±3 V to ±20 V |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz [DATA_NEEDED: full noise density figure from datasheet] |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Total Harmonic Distortion (THD) | — | 0.002 % at 1 kHz, 600 Ω load |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage (NE5532A grade)] 0.5 mV typical |
| Output Current | — | [DATA_NEEDED: rated output drive current] |
| Channel Separation | — | 110 dB at 1 kHz typical |
| MSL (Moisture Sensitivity Level) | — | MSL-1 / 1 (unlimited floor life per JEDEC J-STD-020) |
| Lead-Free | — | Yes |
| Compensation | — | Internally compensated (no external cap required) |
| Input Protection | — | Diodes on both inputs |
| Output Protection | — | Short-circuit protection |