NE5532AD8R2 vs NE5532AD8 Comparação
Comparação detalhada lado a lado de NE5532AD8R2 por onsemi e NE5532AD8 por onsemi. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | NE5532AD8R2 | NE5532AD8 |
|---|---|---|
| Marca | onsemi | onsemi |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Internally compensated dual low-noise operational amplifier | — |
| Number of Amplifier Channels | 2 channels | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Supply Voltage Range | ±3 V to ±20 V | — |
| Corrente de alimentação | 38 mA per channel | — |
| Input Bias Current | 200 nA | — |
| Input Offset Current | 1 µA maximum | — |
| Common-Mode Rejection Ratio | 70 dB | — |
| Compensation Type | Internally compensated | — |
| Encapsulamento | 8-pin SOIC | 8-pin SOIC (D8, SO-8), 3.90 mm body width |
| Package Width | 3.90 mm | — |
| Lead Pitch | 0.154 mm as represented in the supplied listing | — |
| Tipo de montagem | Surface mount | Surface Mount |
| Shipping Configuration | Tape and reel ordering code | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 9 V/µs typical |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Number of Channels | — | 2 (Dual) |
| Amplifier Type | — | Operational Amplifier |
| Supply Voltage (Single) | — | 6 V to 40 V |
| Supply Voltage (Dual) | — | ±3 V to ±20 V |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz [DATA_NEEDED: full noise density figure from datasheet] |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Total Harmonic Distortion (THD) | — | 0.002 % at 1 kHz, 600 Ω load |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage (NE5532A grade)] 0.5 mV typical |
| Output Current | — | [DATA_NEEDED: rated output drive current] |
| Channel Separation | — | 110 dB at 1 kHz typical |
| MSL (Moisture Sensitivity Level) | — | MSL-1 / 1 (unlimited floor life per JEDEC J-STD-020) |
| Lead-Free | — | Yes |
| Compensation | — | Internally compensated (no external cap required) |
| Input Protection | — | Diodes on both inputs |
| Output Protection | — | Short-circuit protection |