NE5532AD8R2 vs NE5532AD8 Comparaison
Comparaison détaillée côte à côte de NE5532AD8R2 par onsemi et NE5532AD8 par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | NE5532AD8R2 | NE5532AD8 |
|---|---|---|
| Marque | onsemi | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Internally compensated dual low-noise operational amplifier | — |
| Number of Amplifier Channels | 2 channels | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Supply Voltage Range | ±3 V to ±20 V | — |
| Courant d'alimentation | 38 mA per channel | — |
| Input Bias Current | 200 nA | — |
| Input Offset Current | 1 µA maximum | — |
| Common-Mode Rejection Ratio | 70 dB | — |
| Compensation Type | Internally compensated | — |
| Boîtier | 8-pin SOIC | 8-pin SOIC (D8, SO-8), 3.90 mm body width |
| Package Width | 3.90 mm | — |
| Lead Pitch | 0.154 mm as represented in the supplied listing | — |
| Type de montage | Surface mount | Surface Mount |
| Shipping Configuration | Tape and reel ordering code | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 9 V/µs typical |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Number of Channels | — | 2 (Dual) |
| Amplifier Type | — | Operational Amplifier |
| Supply Voltage (Single) | — | 6 V to 40 V |
| Supply Voltage (Dual) | — | ±3 V to ±20 V |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz [DATA_NEEDED: full noise density figure from datasheet] |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Total Harmonic Distortion (THD) | — | 0.002 % at 1 kHz, 600 Ω load |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage (NE5532A grade)] 0.5 mV typical |
| Output Current | — | [DATA_NEEDED: rated output drive current] |
| Channel Separation | — | 110 dB at 1 kHz typical |
| MSL (Moisture Sensitivity Level) | — | MSL-1 / 1 (unlimited floor life per JEDEC J-STD-020) |
| Lead-Free | — | Yes |
| Compensation | — | Internally compensated (no external cap required) |
| Input Protection | — | Diodes on both inputs |
| Output Protection | — | Short-circuit protection |