NE5532ADR vs NE5532PSR Comparison
Detailed side-by-side comparison of NE5532ADR by Texas Instruments and NE5532PSR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ ActiveTexas Instruments
NE5532PSR - Dual 10 MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532PSR ✓ ActiveSpecification Comparison
| Parameter | NE5532ADR | NE5532PSR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual low-noise operational amplifier | — |
| Number of Amplifiers | 2 circuits | — |
| Maximum Supply Voltage | 30 V | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Slew Rate | 9 V/µs | 9 V/µs typical |
| Operating Temperature Range | 0°C to +70°C for NE5532x | — |
| Extended-Temperature Variant | -40°C to +85°C for SA5532x | — |
| Package | 8-pin SOIC | — |
| Mounting Type | Surface mount | Surface mount |
| Output Type | Rail-to-rail output | — |
| Input Voltage | [DATA_NEEDED: input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 µA |
| Voltage Noise Density | [DATA_NEEDED: voltage noise density] | — |
| Current Noise Density | [DATA_NEEDED: current noise density] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Supply Current | [DATA_NEEDED: supply current] | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| Number of Amplifier Circuits | — | 2 circuits |
| Amplifier Type | — | General-purpose operational amplifier |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V supply and 600 Ω load |
| Supply Voltage | — | 15 V |
| Operating Temperature | — | 0°C to 70°C |
| Package Type | — | 8-SO plastic package |
| Number of Pins | — | 8 pins |
| Supply Configuration | — | Dual supply supported; ±18 V test condition stated |
| Compensation | — | Internally compensated for unity gain |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |