NE5532ADR vs NE5532PSR Vergleich
Detaillierter Direktvergleich von NE5532ADR von Texas Instruments und NE5532PSR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ AktivTexas Instruments
NE5532PSR - Dual 10 MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532PSR ✓ AktivSpezifikationsvergleich
| Parameter | NE5532ADR | NE5532PSR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Dual low-noise operational amplifier | — |
| Number of Amplifiers | 2 circuits | — |
| Maximum Supply Voltage | 30 V | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Slew Rate | 9 V/µs | 9 V/µs typical |
| Betriebstemperaturbereich | 0°C to +70°C for NE5532x | — |
| Extended-Temperature Variant | -40°C to +85°C for SA5532x | — |
| Gehäuse | 8-pin SOIC | — |
| Montageart | Surface mount | Surface mount |
| Ausgangstyp | Rail-to-rail output | — |
| Input Voltage | [DATA_NEEDED: input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 µA |
| Voltage Noise Density | [DATA_NEEDED: voltage noise density] | — |
| Current Noise Density | [DATA_NEEDED: current noise density] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| Number of Amplifier Circuits | — | 2 circuits |
| Amplifier Type | — | General-purpose operational amplifier |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V supply and 600 Ω load |
| Versorgungsspannung | — | 15 V |
| Betriebstemperatur | — | 0°C to 70°C |
| Package Type | — | 8-SO plastic package |
| Anzahl der Pins | — | 8 pins |
| Supply Configuration | — | Dual supply supported; ±18 V test condition stated |
| Compensation | — | Internally compensated for unity gain |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |