NE5532ADR vs NE5532PSR Comparação
Comparação detalhada lado a lado de NE5532ADR por Texas Instruments e NE5532PSR por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ AtivoTexas Instruments
NE5532PSR - Dual 10 MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532PSR ✓ AtivoComparação de especificações
| Parâmetro | NE5532ADR | NE5532PSR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Dual low-noise operational amplifier | — |
| Number of Amplifiers | 2 circuits | — |
| Maximum Supply Voltage | 30 V | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Slew Rate | 9 V/µs | 9 V/µs typical |
| Faixa de temperatura de operação | 0°C to +70°C for NE5532x | — |
| Extended-Temperature Variant | -40°C to +85°C for SA5532x | — |
| Encapsulamento | 8-pin SOIC | — |
| Tipo de montagem | Surface mount | Surface mount |
| Tipo de saída | Rail-to-rail output | — |
| Input Voltage | [DATA_NEEDED: input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 µA |
| Voltage Noise Density | [DATA_NEEDED: voltage noise density] | — |
| Current Noise Density | [DATA_NEEDED: current noise density] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Corrente de alimentação | [DATA_NEEDED: supply current] | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| Number of Amplifier Circuits | — | 2 circuits |
| Amplifier Type | — | General-purpose operational amplifier |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V supply and 600 Ω load |
| Tensão de alimentação | — | 15 V |
| Temperatura de operação | — | 0°C to 70°C |
| Package Type | — | 8-SO plastic package |
| Número de pinos | — | 8 pins |
| Supply Configuration | — | Dual supply supported; ±18 V test condition stated |
| Compensation | — | Internally compensated for unity gain |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |