NE5532ADRG4 vs NE5532AP Comparison
Detailed side-by-side comparison of NE5532ADRG4 by Texas Instruments and NE5532AP by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
NE5532ADRG4 - Dual 10 MHz Low-Noise Op Amp | Texas Instruments
NE5532ADRG4 ✓ ActiveTexas Instruments
NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments
NE5532AP ✓ ActiveSpecification Comparison
| Parameter | NE5532ADRG4 | NE5532AP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | General-purpose operational amplifier | Low-Noise Operational Amplifier |
| Number of Circuits | 2 circuits | — |
| Gain-Bandwidth Product | 10 MHz typical | — |
| Slew Rate | 9 V/µs typical | [DATA_NEEDED: slew rate V/us] |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz (typ. at 1 kHz) |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| High DC Voltage Gain | 100 V/mV typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz (typ.) |
| Package | 8-SOIC (0.154 inch, 3.90 mm width) | — |
| Packaging | Tape and reel | — |
| Mounting Type | Surface mount | Through-Hole (PDIP) |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C (NE5532x commercial) |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Maximum Output Current | [DATA_NEEDED: maximum output current] | — |
| Thermal Resistance | [DATA_NEEDED: thermal resistance] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant (Pb-free) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Manufacturer | — | Texas Instruments |
| Part Number | — | NE5532AP |
| Number of Channels | — | 2 (Dual) |
| Package / Case | — | 8-PDIP (through-hole, 2.54 mm pitch) |
| Supply Voltage (Dual) | — | ±5 V to ±15 V (max ±18 V) |
| Common-Mode Rejection Ratio (CMRR) | — | 100 dB (typ.) |
| DC Voltage Gain | — | 100 V/mV (typ., 100 dB) |
| Peak-to-Peak Output Swing | — | 32 V typ. (VCC± = ±18 V, RL = 600 ohm) |
| Output Drive | — | 600 ohm loads (typ.) |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |