NE5532ADRG4 vs NE5532AP Comparaison

Comparaison détaillée côte à côte de NE5532ADRG4 par Texas Instruments et NE5532AP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
NE5532ADRG4 NE5532ADRG4 - Dual 10 MHz Low-Noise Op Amp | Texas Instruments

NE5532ADRG4 - Dual 10 MHz Low-Noise Op Amp | Texas Instruments

NE5532ADRG4 ✓ Actif

Comparaison des spécifications

Paramètre NE5532ADRG4 NE5532AP
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Amplifier Type General-purpose operational amplifier Low-Noise Operational Amplifier
Number of Circuits 2 circuits —
Gain-Bandwidth Product 10 MHz typical —
Slew Rate 9 V/µs typical [DATA_NEEDED: slew rate V/us]
Equivalent Input Noise Voltage 5 nV/√Hz typical at 1 kHz 5 nV/√Hz (typ. at 1 kHz)
Common-Mode Rejection Ratio 100 dB typical —
High DC Voltage Gain 100 V/mV typical —
Unity-Gain Bandwidth 10 MHz typical 10 MHz (typ.)
Boîtier 8-SOIC (0.154 inch, 3.90 mm width) —
Packaging Tape and reel —
Type de montage Surface mount Through-Hole (PDIP)
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] 0 °C to +70 °C (NE5532x commercial)
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Courant de sortie maximal [DATA_NEEDED: maximum output current] —
Résistance thermique [DATA_NEEDED: thermal resistance] —
Statut RoHS [DATA_NEEDED: RoHS status] Compliant (Pb-free)
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Manufacturer — Texas Instruments
Part Number — NE5532AP
Number of Channels — 2 (Dual)
Boîtier / Format — 8-PDIP (through-hole, 2.54 mm pitch)
Supply Voltage (Dual) — ±5 V to ±15 V (max ±18 V)
Common-Mode Rejection Ratio (CMRR) — 100 dB (typ.)
DC Voltage Gain — 100 V/mV (typ., 100 dB)
Peak-to-Peak Output Swing — 32 V typ. (VCC± = ±18 V, RL = 600 ohm)
Output Drive — 600 ohm loads (typ.)
Input Protection — Input-protection diodes
Output Protection — Output short-circuit protection

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis