NE5532ADRG4 vs NE5532AP Vergleich
Detaillierter Direktvergleich von NE5532ADRG4 von Texas Instruments und NE5532AP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532ADRG4 - Dual 10 MHz Low-Noise Op Amp | Texas Instruments
NE5532ADRG4 ✓ AktivTexas Instruments
NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments
NE5532AP ✓ AktivSpezifikationsvergleich
| Parameter | NE5532ADRG4 | NE5532AP |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | General-purpose operational amplifier | Low-Noise Operational Amplifier |
| Number of Circuits | 2 circuits | — |
| Gain-Bandwidth Product | 10 MHz typical | — |
| Slew Rate | 9 V/µs typical | [DATA_NEEDED: slew rate V/us] |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz (typ. at 1 kHz) |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| High DC Voltage Gain | 100 V/mV typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz (typ.) |
| Gehäuse | 8-SOIC (0.154 inch, 3.90 mm width) | — |
| Packaging | Tape and reel | — |
| Montageart | Surface mount | Through-Hole (PDIP) |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C (NE5532x commercial) |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Maximaler Ausgangsstrom | [DATA_NEEDED: maximum output current] | — |
| Wärmewiderstand | [DATA_NEEDED: thermal resistance] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant (Pb-free) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Manufacturer | — | Texas Instruments |
| Part Number | — | NE5532AP |
| Number of Channels | — | 2 (Dual) |
| Gehäuse / Bauform | — | 8-PDIP (through-hole, 2.54 mm pitch) |
| Supply Voltage (Dual) | — | ±5 V to ±15 V (max ±18 V) |
| Common-Mode Rejection Ratio (CMRR) | — | 100 dB (typ.) |
| DC Voltage Gain | — | 100 V/mV (typ., 100 dB) |
| Peak-to-Peak Output Swing | — | 32 V typ. (VCC± = ±18 V, RL = 600 ohm) |
| Output Drive | — | 600 ohm loads (typ.) |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |