NE5532DR vs NE5532ADRG4 Comparison
Detailed side-by-side comparison of NE5532DR by Texas Instruments and NE5532ADRG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532DR ✓ ActiveTexas Instruments
NE5532ADRG4 - Dual 10 MHz Low-Noise Op Amp | Texas Instruments
NE5532ADRG4 ✓ ActiveSpecification Comparison
| Parameter | NE5532DR | NE5532ADRG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Dual low-noise operational amplifier | General-purpose operational amplifier |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 10 V/μs typical | 9 V/µs typical |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| Operating Temperature Range | 0 °C to +70 °C for NE5532x | [DATA_NEEDED: operating temperature range] |
| Package | 8-pin SOIC | 8-SOIC (0.154 inch, 3.90 mm width) |
| Mounting Type | Surface Mount | Surface mount |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | — |
| Manufacturer | Texas Instruments | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Supply Current | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Number of Circuits | — | 2 circuits |
| Gain-Bandwidth Product | — | 10 MHz typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Packaging | — | Tape and reel |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Output Current | — | [DATA_NEEDED: maximum output current] |
| Thermal Resistance | — | [DATA_NEEDED: thermal resistance] |