NE5532DR vs NE5532ADRG4 Vergleich
Detaillierter Direktvergleich von NE5532DR von Texas Instruments und NE5532ADRG4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532ADRG4 - Dual 10 MHz Low-Noise Op Amp | Texas Instruments
NE5532ADRG4 ✓ AktivSpezifikationsvergleich
| Parameter | NE5532DR | NE5532ADRG4 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Dual low-noise operational amplifier | General-purpose operational amplifier |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 10 V/μs typical | 9 V/µs typical |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| Betriebstemperaturbereich | 0 °C to +70 °C for NE5532x | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 8-pin SOIC | 8-SOIC (0.154 inch, 3.90 mm width) |
| Montageart | Surface Mount | Surface mount |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | — |
| Manufacturer | Texas Instruments | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Number of Circuits | — | 2 circuits |
| Gain-Bandwidth Product | — | 10 MHz typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Packaging | — | Tape and reel |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximaler Ausgangsstrom | — | [DATA_NEEDED: maximum output current] |
| Wärmewiderstand | — | [DATA_NEEDED: thermal resistance] |