NE5532DR vs NE5532ADRG4 Comparaison

Comparaison détaillée côte à côte de NE5532DR par Texas Instruments et NE5532ADRG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
NE5532ADRG4 NE5532ADRG4 - Dual 10 MHz Low-Noise Op Amp | Texas Instruments

NE5532ADRG4 - Dual 10 MHz Low-Noise Op Amp | Texas Instruments

NE5532ADRG4 ✓ Actif

Comparaison des spécifications

Paramètre NE5532DR NE5532ADRG4
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Amplifier Type Dual low-noise operational amplifier General-purpose operational amplifier
Number of Amplifier Circuits 2 circuits —
Equivalent Input Noise Voltage 5 nV/√Hz typical at 1 kHz 5 nV/√Hz typical at 1 kHz
Unity-Gain Bandwidth 10 MHz typical 10 MHz typical
DC Voltage Gain 100 V/mV typical —
Slew Rate 10 V/μs typical 9 V/µs typical
Common-Mode Rejection Ratio 100 dB typical 100 dB typical
Specified Supply Voltage Range ±5 V to ±15 V —
Maximum Total Supply Voltage 30 V —
Output Voltage Swing 32 V peak-to-peak typical at ±18 V and 600 Ω load —
Plage de température de fonctionnement 0 °C to +70 °C for NE5532x [DATA_NEEDED: operating temperature range]
Boîtier 8-pin SOIC 8-SOIC (0.154 inch, 3.90 mm width)
Type de montage Surface Mount Surface mount
Product Category Standard general-purpose amplifier —
Application Category Audio applications —
Manufacturer Texas Instruments —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] [DATA_NEEDED: lead-free status]
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Courant d'alimentation [DATA_NEEDED: supply current] —
Input Bias Current [DATA_NEEDED: input bias current] —
Open-Loop Gain [DATA_NEEDED: open-loop gain at specified frequency] —
Noise at 20 Hz to 20 kHz [DATA_NEEDED: total input noise over audio bandwidth] —
Number of Circuits — 2 circuits
Gain-Bandwidth Product — 10 MHz typical
High DC Voltage Gain — 100 V/mV typical
Packaging — Tape and reel
Supply Voltage Range — [DATA_NEEDED: supply voltage range]
Input Common-Mode Voltage Range — [DATA_NEEDED: input common-mode voltage range]
Courant de sortie maximal — [DATA_NEEDED: maximum output current]
Résistance thermique — [DATA_NEEDED: thermal resistance]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis