NE5534ADRE4 vs NE5534ADG Comparison
Detailed side-by-side comparison of NE5534ADRE4 by Texas Instruments and NE5534ADG by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | NE5534ADRE4 | NE5534ADG |
|---|---|---|
| Brand | Texas Instruments | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Single general-purpose operational amplifier | General purpose |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Input Noise Density | 3.5 nV/√Hz typical | — |
| DC Voltage Gain | 100 dB typical | — |
| Open-Loop Gain | 100 V/mV typical | [DATA_NEEDED: open-loop gain] |
| Slew Rate | 13 V/ms typical | 13 V/us |
| Peak-to-Peak Output Swing | 32 V typical at VCC+ = +18 V and RL = 600 Ω | — |
| Supply Voltage Range | +3 V to +20 V | 3 V to 20 V |
| Total Supply Current | 38 mA per channel | — |
| Input Bias Current | 500 nA typical | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | 10 dB typical as shown in source snippet | — |
| Offset Nulling | Supported | — |
| External Compensation | Supported | — |
| Package | 8-SOIC (0.154 inch, 3.90 mm width) | 8-SOIC, 0.154 inch (3.90 mm) width |
| Pin Count | 8 pins | — |
| Mounting Type | Surface mount | Surface mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Single low-noise operational amplifier |
| Number of Amplifiers | — | 1 circuit |
| Gain-Bandwidth Product | — | 10 MHz |
| Packaging | — | Tube |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Voltage Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |