NE5534ADRE4 vs NE5534ADG Comparación
Comparación detallada lado a lado de NE5534ADRE4 por Texas Instruments y NE5534ADG por onsemi. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | NE5534ADRE4 | NE5534ADG |
|---|---|---|
| Marca | Texas Instruments | onsemi |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Single general-purpose operational amplifier | General purpose |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Input Noise Density | 3.5 nV/√Hz typical | — |
| DC Voltage Gain | 100 dB typical | — |
| Open-Loop Gain | 100 V/mV typical | [DATA_NEEDED: open-loop gain] |
| Slew Rate | 13 V/ms typical | 13 V/us |
| Peak-to-Peak Output Swing | 32 V typical at VCC+ = +18 V and RL = 600 Ω | — |
| Supply Voltage Range | +3 V to +20 V | 3 V to 20 V |
| Total Supply Current | 38 mA per channel | — |
| Input Bias Current | 500 nA typical | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | 10 dB typical as shown in source snippet | — |
| Offset Nulling | Supported | — |
| External Compensation | Supported | — |
| Encapsulado | 8-SOIC (0.154 inch, 3.90 mm width) | 8-SOIC, 0.154 inch (3.90 mm) width |
| Recuento de pines | 8 pins | — |
| Tipo de montaje | Surface mount | Surface mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Single low-noise operational amplifier |
| Number of Amplifiers | — | 1 circuit |
| Gain-Bandwidth Product | — | 10 MHz |
| Packaging | — | Tube |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Voltage Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |