NE5534ADRE4 vs NE5534ADG Vergleich
Detaillierter Direktvergleich von NE5534ADRE4 von Texas Instruments und NE5534ADG von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | NE5534ADRE4 | NE5534ADG |
|---|---|---|
| Marke | Texas Instruments | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Single general-purpose operational amplifier | General purpose |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Input Noise Density | 3.5 nV/√Hz typical | — |
| DC Voltage Gain | 100 dB typical | — |
| Open-Loop Gain | 100 V/mV typical | [DATA_NEEDED: open-loop gain] |
| Slew Rate | 13 V/ms typical | 13 V/us |
| Peak-to-Peak Output Swing | 32 V typical at VCC+ = +18 V and RL = 600 Ω | — |
| Supply Voltage Range | +3 V to +20 V | 3 V to 20 V |
| Total Supply Current | 38 mA per channel | — |
| Input Bias Current | 500 nA typical | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | 10 dB typical as shown in source snippet | — |
| Offset Nulling | Supported | — |
| External Compensation | Supported | — |
| Gehäuse | 8-SOIC (0.154 inch, 3.90 mm width) | 8-SOIC, 0.154 inch (3.90 mm) width |
| Pin-Anzahl | 8 pins | — |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Single low-noise operational amplifier |
| Number of Amplifiers | — | 1 circuit |
| Gain-Bandwidth Product | — | 10 MHz |
| Packaging | — | Tube |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Voltage Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |