OPA404KP vs AD713JN Comparison
Detailed side-by-side comparison of OPA404KP by Texas Instruments and AD713JN by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | OPA404KP | AD713JN |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Quad High-Speed Precision Difet Operational Amplifier | Quad precision operational amplifier |
| Number of Circuits | 4 | — |
| Gain Bandwidth Product | 6.4 MHz | — |
| Slew Rate | 35 V/us | 10 V/µs |
| Input Offset Voltage (max) | +/-750 uV | — |
| Input Bias Current (max) | +/-4 pA | — |
| Settling to 0.01% | 0.01% settling spec (datasheet value) | — |
| Total Supply Voltage (min) | 10 V | — |
| Total Supply Voltage (max) | 36 V | — |
| Supply Type | Dual or single supply | — |
| Package | 14-PDIP | 14-lead plastic DIP |
| Mounting Type | Through Hole | Through-hole |
| Input Type | Difet (FET input, cascode) | — |
| Pin Configuration | Standard quad op amp pinout | — |
| Manufacturer Series | OPA404 | — |
| Product Status | Active | — |
| Topology | — | Four AD711 BiFET amplifiers on a monolithic die |
| Number of Amplifiers | — | 4 channels |
| Gain-Bandwidth Product | — | 9 MHz |
| Settling Time | — | Approximately 1 µs to 0.01% |
| Input Offset Voltage | — | 0.3 mV typical |
| Input Bias Current | — | 0.5 pA typical |
| Input Voltage Noise | — | 7 nV/√Hz |
| Open-Loop Gain | — | 100 dB typical |
| Maximum Total Supply Voltage | — | 36 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Power Supply Rejection Ratio | — | 100 dB typical |
| Operating Temperature Range | — | 0°C to +70°C |
| Lead-Free Status | — | unknown |
| RoHS Compliance | — | unknown |