OPA404KP vs AD713JN Comparación
Comparación detallada lado a lado de OPA404KP por Texas Instruments y AD713JN por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | OPA404KP | AD713JN |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Quad High-Speed Precision Difet Operational Amplifier | Quad precision operational amplifier |
| Number of Circuits | 4 | — |
| Gain Bandwidth Product | 6.4 MHz | — |
| Slew Rate | 35 V/us | 10 V/µs |
| Input Offset Voltage (max) | +/-750 uV | — |
| Input Bias Current (max) | +/-4 pA | — |
| Settling to 0.01% | 0.01% settling spec (datasheet value) | — |
| Total Supply Voltage (min) | 10 V | — |
| Total Supply Voltage (max) | 36 V | — |
| Supply Type | Dual or single supply | — |
| Encapsulado | 14-PDIP | 14-lead plastic DIP |
| Tipo de montaje | Through Hole | Through-hole |
| Input Type | Difet (FET input, cascode) | — |
| Pin Configuration | Standard quad op amp pinout | — |
| Manufacturer Series | OPA404 | — |
| Product Status | Active | — |
| Topología | — | Four AD711 BiFET amplifiers on a monolithic die |
| Number of Amplifiers | — | 4 channels |
| Gain-Bandwidth Product | — | 9 MHz |
| Settling Time | — | Approximately 1 µs to 0.01% |
| Input Offset Voltage | — | 0.3 mV typical |
| Input Bias Current | — | 0.5 pA typical |
| Input Voltage Noise | — | 7 nV/√Hz |
| Open-Loop Gain | — | 100 dB typical |
| Maximum Total Supply Voltage | — | 36 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Power Supply Rejection Ratio | — | 100 dB typical |
| Rango de temperatura de funcionamiento | — | 0°C to +70°C |
| Lead-Free Status | — | unknown |
| RoHS Compliance | — | unknown |