OPA404KP vs AD713JN Vergleich
Detaillierter Direktvergleich von OPA404KP von Texas Instruments und AD713JN von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | OPA404KP | AD713JN |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Quad High-Speed Precision Difet Operational Amplifier | Quad precision operational amplifier |
| Number of Circuits | 4 | — |
| Gain Bandwidth Product | 6.4 MHz | — |
| Slew Rate | 35 V/us | 10 V/µs |
| Input Offset Voltage (max) | +/-750 uV | — |
| Input Bias Current (max) | +/-4 pA | — |
| Settling to 0.01% | 0.01% settling spec (datasheet value) | — |
| Total Supply Voltage (min) | 10 V | — |
| Total Supply Voltage (max) | 36 V | — |
| Supply Type | Dual or single supply | — |
| Gehäuse | 14-PDIP | 14-lead plastic DIP |
| Montageart | Through Hole | Through-hole |
| Input Type | Difet (FET input, cascode) | — |
| Pin Configuration | Standard quad op amp pinout | — |
| Manufacturer Series | OPA404 | — |
| Product Status | Active | — |
| Topologie | — | Four AD711 BiFET amplifiers on a monolithic die |
| Number of Amplifiers | — | 4 channels |
| Gain-Bandwidth Product | — | 9 MHz |
| Settling Time | — | Approximately 1 µs to 0.01% |
| Input Offset Voltage | — | 0.3 mV typical |
| Input Bias Current | — | 0.5 pA typical |
| Input Voltage Noise | — | 7 nV/√Hz |
| Open-Loop Gain | — | 100 dB typical |
| Maximum Total Supply Voltage | — | 36 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Power Supply Rejection Ratio | — | 100 dB typical |
| Betriebstemperaturbereich | — | 0°C to +70°C |
| Lead-Free Status | — | unknown |
| RoHS Compliance | — | unknown |