PCAL6408AHK vs PCA6408AHKX Comparison
Detailed side-by-side comparison of PCAL6408AHK by NXP Semiconductors and PCA6408AHKX by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | PCAL6408AHK | PCA6408AHKX |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | 8-bit I2C-bus/SMBus level translating I/O expander | — |
| Number of I/O Pins | 8 | — |
| Interface | I2C, SMBus | — |
| Maximum Bus Clock Frequency | 400 kHz | — |
| Supply Voltage Range (VDD) | 1.65 V to 5.5 V | — |
| Level Translation | Yes (dual power rail) | — |
| Agile I/O Features | Programmable output drive strength, latchable inputs | — |
| Interrupt Output | Yes (open-drain) | Open-drain |
| Reset Input | Yes (active-low reset) | — |
| Configuration Registers | Yes | — |
| Package | XQFN-16 (1.8 x 2.6 mm) | — |
| Mounting Type | Surface Mount | Surface mount |
| Lifecycle Status | Active | — |
| Drop-in Compatibility | Pin-to-pin replacement, software backward-compatible with PCA6408A | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Number of I/O Ports | — | 8 ports |
| Serial Interface | — | I2C-bus and SMBus |
| Maximum I2C Bus Frequency | — | 400 kHz |
| Supported Bus Frequencies | — | 100 kHz and 400 kHz |
| Maximum Supply Voltage | — | 5.5 V |
| Interface Type | — | Level-translating I/O expander |
| Reset Function | — | Dedicated RESET input |
| Package Type | — | 16-pin XQFN |
| Package Dimensions | — | 1.8 mm x 2.6 mm |
| Shipping Format | — | Tape and reel |
| Port Configuration | — | [DATA_NEEDED: input, output, or bidirectional port configuration] |
| Supply Current | — | [DATA_NEEDED: typical and maximum supply current] |
| I2C Slave Address | — | [DATA_NEEDED: I2C slave address] |
| Logic Input Threshold | — | [DATA_NEEDED: port and bus input threshold voltages] |
| Output Driver Type | — | [DATA_NEEDED: port output driver configuration] |
| Reset and Interrupt Timing | — | [DATA_NEEDED: reset assertion and interrupt response timing] |
| REACH Status | — | [DATA_NEEDED: REACH status] |