PCAL6408AHK vs PCA6408AHKX 对比
详细并排对比 PCAL6408AHK 出自 NXP Semiconductors 和 PCA6408AHKX 出自 NXP Semiconductors。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
规格对比
| 参数 | PCAL6408AHK | PCA6408AHKX |
|---|---|---|
| 品牌 | NXP Semiconductors | NXP Semiconductors |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | 8-bit I2C-bus/SMBus level translating I/O expander | — |
| Number of I/O Pins | 8 | — |
| 接口 | I2C, SMBus | — |
| Maximum Bus Clock Frequency | 400 kHz | — |
| Supply Voltage Range (VDD) | 1.65 V to 5.5 V | — |
| Level Translation | Yes (dual power rail) | — |
| Agile I/O Features | Programmable output drive strength, latchable inputs | — |
| Interrupt Output | Yes (open-drain) | Open-drain |
| Reset Input | Yes (active-low reset) | — |
| Configuration Registers | Yes | — |
| 封装 | XQFN-16 (1.8 x 2.6 mm) | — |
| 安装类型 | Surface Mount | Surface mount |
| 生命周期状态 | Active | — |
| Drop-in Compatibility | Pin-to-pin replacement, software backward-compatible with PCA6408A | — |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Number of I/O Ports | — | 8 ports |
| Serial Interface | — | I2C-bus and SMBus |
| Maximum I2C Bus Frequency | — | 400 kHz |
| Supported Bus Frequencies | — | 100 kHz and 400 kHz |
| Maximum Supply Voltage | — | 5.5 V |
| 接口类型 | — | Level-translating I/O expander |
| Reset Function | — | Dedicated RESET input |
| Package Type | — | 16-pin XQFN |
| Package Dimensions | — | 1.8 mm x 2.6 mm |
| Shipping Format | — | Tape and reel |
| Port Configuration | — | [DATA_NEEDED: input, output, or bidirectional port configuration] |
| 电源电流 | — | [DATA_NEEDED: typical and maximum supply current] |
| I2C Slave Address | — | [DATA_NEEDED: I2C slave address] |
| Logic Input Threshold | — | [DATA_NEEDED: port and bus input threshold voltages] |
| Output Driver Type | — | [DATA_NEEDED: port output driver configuration] |
| Reset and Interrupt Timing | — | [DATA_NEEDED: reset assertion and interrupt response timing] |
| REACH Status | — | [DATA_NEEDED: REACH status] |