PCAL6408AHK vs PCA6408AHKX 比較

詳細な並列比較: PCAL6408AHK メーカー: NXP Semiconductors および PCA6408AHKX メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

NXP Semiconductors
PCAL6408AHK PCAL6408AHK - 8-Bit I2C I/O Expander, XQFN-16 | NXP

PCAL6408AHK - 8-Bit I2C I/O Expander, XQFN-16 | NXP

PCAL6408AHK ✓ 生産中
NXP Semiconductors
PCA6408AHKX PCA6408AHKX - 8-Bit I2C I/O Expander | NXP Semiconductors

PCA6408AHKX - 8-Bit I2C I/O Expander | NXP Semiconductors

PCA6408AHKX ✓ 生産中

仕様比較

パラメータ PCAL6408AHK PCA6408AHKX
ブランド NXP Semiconductors NXP Semiconductors
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Product Type 8-bit I2C-bus/SMBus level translating I/O expander —
Number of I/O Pins 8 —
インターフェース I2C, SMBus —
Maximum Bus Clock Frequency 400 kHz —
Supply Voltage Range (VDD) 1.65 V to 5.5 V —
Level Translation Yes (dual power rail) —
Agile I/O Features Programmable output drive strength, latchable inputs —
Interrupt Output Yes (open-drain) Open-drain
Reset Input Yes (active-low reset) —
Configuration Registers Yes —
パッケージ XQFN-16 (1.8 x 2.6 mm) —
実装タイプ Surface Mount Surface mount
ライフサイクル状態 Active —
Drop-in Compatibility Pin-to-pin replacement, software backward-compatible with PCA6408A —
RoHS ステータス [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
動作温度範囲 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Number of I/O Ports — 8 ports
Serial Interface — I2C-bus and SMBus
Maximum I2C Bus Frequency — 400 kHz
Supported Bus Frequencies — 100 kHz and 400 kHz
Maximum Supply Voltage — 5.5 V
インターフェースタイプ — Level-translating I/O expander
Reset Function — Dedicated RESET input
Package Type — 16-pin XQFN
Package Dimensions — 1.8 mm x 2.6 mm
Shipping Format — Tape and reel
Port Configuration — [DATA_NEEDED: input, output, or bidirectional port configuration]
電源電流 — [DATA_NEEDED: typical and maximum supply current]
I2C Slave Address — [DATA_NEEDED: I2C slave address]
Logic Input Threshold — [DATA_NEEDED: port and bus input threshold voltages]
Output Driver Type — [DATA_NEEDED: port output driver configuration]
Reset and Interrupt Timing — [DATA_NEEDED: reset assertion and interrupt response timing]
REACH Status — [DATA_NEEDED: REACH status]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼