SN65HVD05D vs SN65HVD06D Comparison
Detailed side-by-side comparison of SN65HVD05D by Texas Instruments and SN65HVD06D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05D ✓ ActiveTexas Instruments
SN65HVD06D - High-Output RS-485 Transceiver, 8-SOIC | Texas Instruments (Tape & Reel)
SN65HVD06D ✓ ActiveSpecification Comparison
| Parameter | SN65HVD05D | SN65HVD06D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Half-duplex RS-422/RS-485 transceiver | — |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Minimum Differential Output Voltage | 2.5 V into a 54-ohm load | 2.5 V into 54 ohm load |
| Driver Output State | 3-state | — |
| Receiver Failsafe Behavior | Open-circuit, short-circuit, and idle-bus failsafe | — |
| Unit Load Option | 1/8 unit load | — |
| Maximum Node Count | Up to 256 nodes on the bus | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Driver Output Slew Rate | Controlled | — |
| Communication Mode | Half-duplex | — |
| Standards Compatibility | ANSI TIA/EIA-485-A and ISO 8482E | — |
| Package | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Mounting Type | Surface mount | Surface Mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Function | — | Transceiver |
| Protocol | — | RS422, RS485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Data Rate | — | 10 Mbps |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis mV] |
| Supply Voltage | — | 4.5 V to 5.5 V |
| Operating Temperature | — | -40C to +85C |
| Bus-Pin ESD Protection (HBM) | — | 16 kV |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Failsafe | — | Open, short, and idle-bus |
| Standards Compliance | — | ANSI TIA/EIA-485-A, ISO 8482E |
| MSL Level | — | 1 (unlimited) |