SN65HVD05D vs SN65HVD06D Comparación
Comparación detallada lado a lado de SN65HVD05D por Texas Instruments y SN65HVD06D por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05D ✓ ActivoTexas Instruments
SN65HVD06D - High-Output RS-485 Transceiver, 8-SOIC | Texas Instruments (Tape & Reel)
SN65HVD06D ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD05D | SN65HVD06D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | — | In Stock |
| Precio unitario (USD) | — | $0,74 |
| Product Type | Half-duplex RS-422/RS-485 transceiver | — |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Minimum Differential Output Voltage | 2.5 V into a 54-ohm load | 2.5 V into 54 ohm load |
| Driver Output State | 3-state | — |
| Receiver Failsafe Behavior | Open-circuit, short-circuit, and idle-bus failsafe | — |
| Unit Load Option | 1/8 unit load | — |
| Maximum Node Count | Up to 256 nodes on the bus | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Driver Output Slew Rate | Controlled | — |
| Communication Mode | Half-duplex | — |
| Standards Compatibility | ANSI TIA/EIA-485-A and ISO 8482E | — |
| Encapsulado | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Tipo de montaje | Surface mount | Surface Mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Función | — | Transceiver |
| Protocol | — | RS422, RS485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Velocidad de datos | — | 10 Mbps |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis mV] |
| Tensión de alimentación | — | 4.5 V to 5.5 V |
| Temperatura de funcionamiento | — | -40C to +85C |
| Bus-Pin ESD Protection (HBM) | — | 16 kV |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Failsafe | — | Open, short, and idle-bus |
| Standards Compliance | — | ANSI TIA/EIA-485-A, ISO 8482E |
| Nivel MSL | — | 1 (unlimited) |