SN65HVD05D vs SN65HVD06D Vergleich
Detaillierter Direktvergleich von SN65HVD05D von Texas Instruments und SN65HVD06D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05D ✓ AktivTexas Instruments
SN65HVD06D - High-Output RS-485 Transceiver, 8-SOIC | Texas Instruments (Tape & Reel)
SN65HVD06D ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD05D | SN65HVD06D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | — | In Stock |
| Stückpreis (USD) | — | $0,74 |
| Product Type | Half-duplex RS-422/RS-485 transceiver | — |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Minimum Differential Output Voltage | 2.5 V into a 54-ohm load | 2.5 V into 54 ohm load |
| Driver Output State | 3-state | — |
| Receiver Failsafe Behavior | Open-circuit, short-circuit, and idle-bus failsafe | — |
| Unit Load Option | 1/8 unit load | — |
| Maximum Node Count | Up to 256 nodes on the bus | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Driver Output Slew Rate | Controlled | — |
| Communication Mode | Half-duplex | — |
| Standards Compatibility | ANSI TIA/EIA-485-A and ISO 8482E | — |
| Gehäuse | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Montageart | Surface mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Funktion | — | Transceiver |
| Protocol | — | RS422, RS485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Datenrate | — | 10 Mbps |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis mV] |
| Versorgungsspannung | — | 4.5 V to 5.5 V |
| Betriebstemperatur | — | -40C to +85C |
| Bus-Pin ESD Protection (HBM) | — | 16 kV |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Failsafe | — | Open, short, and idle-bus |
| Standards Compliance | — | ANSI TIA/EIA-485-A, ISO 8482E |
| MSL-Level | — | 1 (unlimited) |